Despatch LAD Series WITH PROTOCOL PLUS Manual de usuario descargar pdf (Pagina 41)

Communication Page (optional)

The Communication Page contains parameters for the communications feature. To

access the Communications Page, enter the Setup Mode (see description earlier in this

manual). Press the Page key until Communication is displayed. Press the Menu key.

(NOTE: If there is no change in the display, the controller does not have the

communications board installed.) Each parameter can be changed by pressing the

Menu key until the desired parameter is displayed, and then pressing the keys to

change the value.

Menu Item

Display

Description

Range

Address

Communication CommAddr

Sets address node for

control

1 to 247

Mode

Communication Mode

Turns on/off

communications

OFF, Modbus

Baud Rate

Communication BaudRate

Sets interface speed

2400, 4800, 9600, 19.2K,

38.4K

Parity

Communication Parity

Sets parity for interface

None, Odd, Even

Real Time Clock Page

The Real Time Clock Page allows the control to be configured to have an operating

mode begin automatically at a specific time on a specific day of the week. The real time

clock feature is also used for using the Power Failure Recovery mode Time Limit

feature (see Control Page). The real time clock is a seven day, 24 hour clock with

battery backup.

To access the Real Time Clock Page, enter the Setup Mode. Press the Page key until

Clock is displayed. Press the Menu key. Each parameter can be changed by pressing

the Menu key until the desired parameter is displayed, and then pressing the keys

to change the value.

Menu Item

Display

Description

Range

Day of the

week

Clock Day

Setting for current day of the week

Sun, Mon, Tue, Wed, Thu, Fri, Sat

Time of

day

Clock HH:MM

Setting for current time of the day

00:00 to 23:59

Reset

clock

Clock UP to

Reset CLK*

Press the key to set the clock

to entered values

Ready, Done

* If the key is not pressed, the clock values will retain their original values. The

display will change to Done if the clock is reset

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 67 68

Comentarios a estos manuales

Sin comentarios

Despatch LAD Series WITH PROTOCOL PLUS Manual de usuario Pagina 41

Comentarios a estos manuales

Relacionado con productos y manuales para Horno Despatch LAD Series WITH PROTOCOL PLUS