Despatch Protocol Manager with Protocol Plus Manual de usuario descargar pdf (Pagina 15)

Protocol Manager Software E-100

Select the baud rate that corresponds to the rate programmed into the Protocol Plus

controller(s). 19.2 K is the default configuration. 38.4 K provides fastest

communication. If the controller(s) will not go on line, try a lower speed.

3. Parity Option

None

Odd

Even

Select the parity that corresponds to that which is programmed into the Protocol

Plus controller(s).

4. Use Long Timeout Delay checkbox

The software uses a timer to check Protocol controller response time. The software

calculates acceptable response time - especially critical when using multiple

controllers. If an unexpected communication failure occurs, checking this box will

increase the communication timeout period. NOTE: For normal operation, leave this

box unchecked: don't check this box unless a communication failure occurs.

5. Press the Accept button to save the selected parameters. Press the Restore

button to return to the previously saved parameters.

NOTE that changes will not take effect until the Accept button is pressed.

6. Click on the OK button to save settings.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 56 57

Sin comentarios

Despatch Protocol Manager with Protocol Plus Manual de usuario Pagina 15