Despatch RFD1-42-2E with Protocol Plus Manual de usuario Pagina 38
- Pagina / 75
- Tabla de contenidos
- SOLUCIÓN DE PROBLEMAS
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
30
Auto Start Page
The Auto Start Page can be configured to automatically start Manual, Timer or Profile
Mode at a specified time and day. Note that if Auto Start Enable is set to Yes in the
Setup Mode, the Auto Start feature is not turned on - it is available to the operator to be
activated in Stopped Mode.
To configure the Auto Start feature:
1. Access the Setup Mode.
2. Press the Page key until Auto Start is displayed.
3. Press the Menu key. If there is no change in the display, the controller may not
have the realtime clock option.
4. Set Auto Start Enable to Yes.
5. Using the Menu key, scroll through the options available and use the keys
to set the mode desired for each day of the week. You may select from Manual,
Timer, or Profile 1 through 8.
6. When the mode is set press the Menu key.
7. Enter the time of day you wish the mode to activate.
8. Continue through the rest of the week by pressing the Menu key, or press the
Page key when done.
One Auto Start mode can be set for each day of the week. Exit the Setup mode by
pressing and holding the Page key for three seconds. Press the Select key until Auto
Start is displayed. Make sure the correct time and day is displayed. If not proper, set it
to the correct time on the Real Time Clock Page in the Setup mode.
To activate the Auto Start Mode,
1. On Auto Start page, Enable is set to Yes.
2. LCD reads Active on Line 1 in Auto Start Mode.
3. On Auto Start page Enable set to No, will deactivate Auto Start Mode.
Note that once you activate Auto Start, you can continue to use all operating modes as
normal. If an operating mode is running at the time of a preset Auto Start function, and
Auto Start is activated, the existing operating mode will override the Auto Start function
and the Auto Start will not turn on.
Note: All process Set to Run in Auto Start Mode must be at least one minute long for all
Run Modes (Manual, Timer, and Profile).
- PN 146298 1
- REVISION N 1
- Caution 2
- PREFACE 5
- TABLE OF CONTENTS 7
- INTRODUCTION 9
- Special Features 9
- Specifications 10
- Temperature 11
- THEORY OF OPERATION 13
- Damper Control 14
- Full Open Position 15
- Other Damper Settings 15
- Unpacking and Inspection 16
- OVEN INSTRUCTIONS 16
- All grounding and safety 17
- Operating 18
- Loading the Oven 19
- Pre-Startup Checklist 20
- Startup 21
- CONTROL INSTRUCTIONS 22
- Theory of Control Operation 22
- Operating Modes 24
- Setup Mode 24
- Fast Start Mode 24
- High Limit 25
- Indicators 25
- Displays 26
- Key Functions 26
- Outputs 27
- Communication 28
- Optional Software 28
- INSTRUCTIONS 29
- Start-Up 29
- Operation 30
- Timer Mode 31
- Profile Mode 32
- Auto Start Mode 32
- Program Page 34
- Profile # 36
- Sample Profile 37
- Auto Start Page 38
- PID Page 40
- Control Page 41
- Real Time Clock Page 42
- Test Page 44
- Zone Calibration Page 45
- Sensor Calibration Page 47
- Enable Page 49
- Digital Inputs (optional) 50
- Error Messages and Alarms 51
- Technical Specifications 59
- MAINTENANCE 60
- Checklist 60
- Replacement 62
- Protocol Plus™ Instrument 63
- Fan Motor 64
- TROUBLESHOOTING 65
- DRAWINGS 67
- APPENDIX 74
Relacionado con productos y manuales para Horno Despatch RFD1-42-2E with Protocol Plus
Horno Despatch S Type Manual de usuario
(95 paginas)
(95 paginas)
Aquatic Visit Links AI6042D manuales
Manuales del propietario y guías del usuario para Cocina Aquatic Visit Links AI6042D.
Ofrecemos 1 manuales en pdf Aquatic Visit Links AI6042D para descargar gratis por tipos de documentos: Manual de usuario
Comentarios a estos manuales