Despatch Protocol Plus Modbus Communications Manual de usuario Pagina 11

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 53
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 10
Chromalox Instruments and Controls
A-51643 Rev. 6 10/06/03 5
2.4.2 Communication Card Jumper Settings
1. Turn off power to the controller.
2. Remove the back cover of the controller (if it is not already removed) by removing the two screws at
the top of the unit.
3. Set the jumpers on the communication card for the desired serial communication interface based on
Figure 5: Communication Card (0113-10175) Jumper Settings.
4. Reinstall the back cover.
5. Reapply power to the controller.
Figure 5: Communication Card (0113-10175) Jumper Settings
RS232 Jumper Settings
RS422 Jumper Settings
RS485 Jumper Settings
Vista de pagina 10
1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 52 53

Comentarios a estos manuales

Sin comentarios